MS Screw Driver Kit
Nominal Voltages up to 36 kV / 15 ... 60 Hz
- For indoor and outdoor installations
- For loosening and tightening the screw plugs of cable sealing ends under live conditions
- With interchangeable operating heads (straight and angled)
Figure 1 and Figure 2
Application
The insulated screw driver with interchangeable operating heads (straight and angled) for attaching special bits and screw plugs allows to loosen or tighten the screw plugs of cable sealing ends under live conditions. Only tested bits (screw plug blade inserts) and special screw plugs may be used.
Requirements
Maintenance work from 1 to 36 kV must be carried out under supervision of a qualified electrician according to EN 50110-1 "Operation of electrical installations – Minimum Requirements", observing clauses 6.3.1 to 6.3.12. In Germany MS screw drivers are subject to BGV A3 and BGR A3 of the national accident prevention regulations (UVV) "Elektrische Anlagen und Betriebsmittel" [Electrical installations and equipment] stipulated by the German Employer's Liability Association for the energy, textile, electrical and media product sectors (BGETEM).
The insulated screw driver with interchangeable operating heads (straight and angled) for attaching special bits and screw plugs allows to loosen or tighten the screw plugs of cable sealing ends under live conditions. Only tested bits (screw plug blade inserts) and special screw plugs may be used.
Requirements
Maintenance work from 1 to 36 kV must be carried out under supervision of a qualified electrician according to EN 50110-1 "Operation of electrical installations – Minimum Requirements", observing clauses 6.3.1 to 6.3.12. In Germany MS screw drivers are subject to BGV A3 and BGR A3 of the national accident prevention regulations (UVV) "Elektrische Anlagen und Betriebsmittel" [Electrical installations and equipment] stipulated by the German Employer's Liability Association for the energy, textile, electrical and media product sectors (BGETEM).
Figure 3
1 Operating stick with
a Adjustable handle
b Handle
c Hand guard
d Insulating element
e Red ring
f Extension
2 Operating head, straight or angled (30° or 70°)
3 Special bit
Dimensions:
lH Length of the handle = 385 mm
lI Length of the insulating element = 525 mm
lV Length of the extension = 430 mm
lG Total length = 1375 mm
a Adjustable handle
b Handle
c Hand guard
d Insulating element
e Red ring
f Extension
2 Operating head, straight or angled (30° or 70°)
3 Special bit
Dimensions:
lH Length of the handle = 385 mm
lI Length of the insulating element = 525 mm
lV Length of the extension = 430 mm
lG Total length = 1375 mm
