DEHNtrack
Surge Arrester for d.c. Systems > 1 kV
- Metal oxide arrester for d.c. systems up to 4.8 kV
- Nominal discharge current of 10 kA (8/20 µs)
- High current withstand capability of 100 kA (4/10 µs)
- For indoor and outdoor use
- Maximum protection under conditions of pollution
- Maximum protection against mechanical vibrations
- Break resistance in case of overload
- Freely selectable mounting position
Type
DEHNtrack .. 10 3: For indoor and outdoor use for a rated voltage (d.c.) of 1.2 /.2.4 / 3.6 and 4.8 kV
Details
For protecting d.c. systems and rectifier stations against surges. The arresters are especially suited for installation in rolling stock, trolley buses and overhead lines.
The active part of DEHNtrack d.c. arresters consists of high-quality and thermally stable ZnO varistor discs. The continuous U/I characteristic, quick sparkover performance and low residual voltage of ZnO varistor discs make them ideal components for d.c. arresters.
The coating of the varistor block is decisive for the design of arresters for d.c. systems. High-temperature vulcanised silicone has been used for permanent protection from environmental influences such as air humidity or deposits of pollution. Moreover, repeated climatic and mechanical stress has also been considered.
The rated voltage is selected according to the maximum operating voltage of the d.c. system. DEHNtrack d.c. arresters are available with the following rated voltages:
Ur = 1.2 kV --> DTR 1.2 10 3
Ur = 2.4 kV --> DTR 2.4 10 3
Ur = 3.6 kV --> DTR 3.6 10 3
Ur = 4.8 kV --> DTR 4.8 10 3
Numerous clamp connections and fixing elements are available as accessory.
The active part of DEHNtrack d.c. arresters consists of high-quality and thermally stable ZnO varistor discs. The continuous U/I characteristic, quick sparkover performance and low residual voltage of ZnO varistor discs make them ideal components for d.c. arresters.
The coating of the varistor block is decisive for the design of arresters for d.c. systems. High-temperature vulcanised silicone has been used for permanent protection from environmental influences such as air humidity or deposits of pollution. Moreover, repeated climatic and mechanical stress has also been considered.
The rated voltage is selected according to the maximum operating voltage of the d.c. system. DEHNtrack d.c. arresters are available with the following rated voltages:
Ur = 1.2 kV --> DTR 1.2 10 3
Ur = 2.4 kV --> DTR 2.4 10 3
Ur = 3.6 kV --> DTR 3.6 10 3
Ur = 4.8 kV --> DTR 4.8 10 3
Numerous clamp connections and fixing elements are available as accessory.