According to EN 62561-2, for use in lightning protection and earth-termination systems.
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Characteristics |
Standard |
Conductivity |
Resistivity |
Weight |
GTIN |
PU |
Note: Al and AlMgSi must not be installed directly (without distance) on, in, or under plaster, mortar or concrete, and not in soil. |
Round wires - DEHNalu wire, 8 mm / 50 mm², AlMgSi, semi-rigid Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: AlMgSi
Characteristics: semi-rigid
Standard: EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 ALMGSI HH R148M
Part No.: 840 008
or equivalent.
Round wires - DEHNalu wire, 8 mm / 50 mm², AlMgSi, semi-rigid Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: AlMgSi
Characteristics: semi-rigid
Standard: EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 ALMGSI HH R21M
Part No.: 840 108
or equivalent.
Round wires - DEHNalu wire, 8 mm / 50 mm², AlMgSI, torsionally soft Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: AlMgSi
Characteristics: torsion-soft
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 ALMGSI WEI R148M
Part No.: 840 018
or equivalent.
Round wires - DEHNalu wire, 8 mm / 50 mm², AlMgSi, soft twistable Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: AlMgSi
Characteristics: torsion-soft
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 ALMGSI WEI R21M
Part No.: 840 028
or equivalent.
Round wires - DEHNalu wire, 10 mm / 78 mm², Al, torsionally soft Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: Al
Characteristics: torsion-soft
Standard: EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 Al WEI R100M
Part No.: 840 010
or equivalent.
Wire with plastic sheath (halogen-free, frost-resistant and UV stabilised) as additional mechanical protection / corrosion protection e.g. for installation behind facades.
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Characteristics |
Standard |
Diameter Ø outside |
Material of sheath |
Sheath thickness |
Conductivity |
Resistivity |
Weight |
GTIN |
PU |
Round wires - DEHNalu wire w. plastic sheath, 8 mm / 50 mm², AlMgSi, soft Round wire with plastic coating according to DIN EN 62561-2 (VDE 0185 Part 202) for use as down conductor in lightning protection systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: AlMgSi
Characteristics: soft
Standard: based on EN 62561-2
Diameter Ø outside: 11 mm
delivery and installation.
Brand: DEHN
Type: RD 8 ALMGSI WE KM R100M
Part No.: 840 118
or equivalent.
Round wires - DEHNalu wire with plastic sheath, 8 mm / 50 mm², Al, soft Round wire with plastic coating according to DIN EN 62561-2 (VDE 0185 Part 202) for use as down conductor in lightning protection systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: Al
Characteristics: soft
Standard: EN 62561-2
Diameter Ø outside: 11 mm
delivery and installation.
Brand: DEHN
Type: RD 8 AL WE KM R100M
Part No.: 840 128
or equivalent.
New composite material.
Lighter than copper.
For use above ground as air-termination and down conductor, or for equipotential bonding.
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Characteristics |
Standard |
Cu sheath |
Conductivity |
Resistivity |
Weight |
GTIN |
PU |
Note: DEHNcupal wire can be twisted or straightened with the wire straightening devices. |
Round wire - DEHNcupal wire 8 mm / 50 mm² Al/Cu, soft twistable Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: Al / Cu
Characteristics: torsion-soft
Standard: based on EN 62561-2
Cu sheath: min. 0.26 mm
delivery and installation.
Brand: DEHN
Type: RD 8 AL CU WEI R110M
Part No.: 833 008
or equivalent.
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Characteristics |
Standard |
Conductivity |
Resistivity |
Short-circuit current (50 Hz) (1 s; ≤ 300 °C) |
Weight |
GTIN |
PU |
Round wires - Copper wire, 8 mm / 50 mm², Cu, soft, F20 Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: Cu
Characteristics: soft F20
Standard: EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 CU F20 WEI R100M
Part No.: 830 008
or equivalent.
Round wires - Copperwire, 8 mm / 50 mm², Cu, soft, F20 Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: Cu
Characteristics: soft F20
Standard: EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 CU F20 WEI R20M
Part No.: 830 108
or equivalent.
Round wires - Copperwire, 8 mm / 50 mm², Cu, semi-rigid F25 Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: Cu
Characteristics: semi-rigid F25
Standard: EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 CU F25 HH R100M
Part No.: 830 038
or equivalent.
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Standard |
Zinc sheath |
Conductivity |
Resistivity |
Short-circuit current (50 Hz) (1 s; ≤ 300 °C) |
Weight |
GTIN |
PU |
Round wires - Steel wire, 8 mm / 50 mm², St/tZn Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: St/tZn
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 STTZN R127M
Part No.: 800 008
or equivalent.
Round wires - Steel wire, 10 mm / 78 mm², St/tZn Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection or earth-termination systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: St/tZn
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 STTZN R81M
Part No.: 800 010
or equivalent.
Round wires - steel wire, 10 mm / 78 mm², St/tZn Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: St/tZn
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 STTZN R30M
Part No.: 800 310
or equivalent.
With zinc coating ≥ 50 µm average (about 350 g/m2). Suitable for installation in reinforcements (e.g. concrete supports).
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Standard |
Zinc sheath |
Conductivity |
Resistivity |
Short-circuit current (50 Hz) (1 s; ≤ 300 °C) |
Length |
Weight |
GTIN |
PU |
Round wires - steel wire 10 mm / 78 mm², 3000 mm long, St/tZn Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection or earth-termination systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: St/tZn
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 STTZN L3000
Part No.: 800 910
or equivalent.
Round wires - steel wire 10 mm / 78 mm², 6000 mm long, St/tZn Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection or earth-termination systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: St/tZn
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 STTZN L6000
Part No.: 800 911
or equivalent.
With plastic sheath as additional mechanical protection / corrosion protection e.g. at connections to the lightning protection system.
Suitable for installation on, in and under plaster, mortar or concrete.
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Standard |
Diameter Ø outside |
Material of sheath |
Sheath thickness |
Design |
Zinc sheath |
Conductivity |
Resistivity |
Weight |
GTIN |
PU |
Part No. |
Round wires - Steel wire with plastic sheath, 8 mm / 50 mm², St/tZn Round wire with plastic coating according to DIN EN 62561-2 (VDE 0185 Part 202) for use as down conductor in lightning protection systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: St/tZn
Standard: based on EN 62561-2
Diameter Ø outside: 11 mm
delivery and installation.
Brand: DEHN
Type: RD 8 KM STTZN R75M
Part No.: 800 108
or equivalent.
Round wires - Steel wire with plastic sheath, 10 mm / 78 mm², St/tZn Round wire with plastic coating according to DIN EN 62561-2 (VDE 0185 Part 202) for use as down conductor or terminal lug in lightning protection systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: St/tZn
Standard: based on EN 62561-2
Diameter Ø outside: 13 mm
delivery and installation.
Brand: DEHN
Type: RD 10 KM STTZN R50M
Part No.: 800 110
or equivalent.
Stainless steel wire (Rd 10 mm) for use in soil has to be made of StSt (V4A) with a molybdenum proportion of > 2 %, e.g. 1.4571 or 1.4404, in accordance with EN 62561-2 and IEC/EN 62305-3, DIN 18014 and DIN VDE 0151.
Type |
---|
Part No. |
Diameter Ø conductor |
Cross-section |
Material |
Material No. |
ASTM / AISI: |
Standard |
Conductivity |
Resistivity |
Short-circuit current (50 Hz) (1 s; ≤ 300 °C) |
Weight |
GTIN |
PU |
Round wires - Stainless steel wire, 8 mm / 50 mm², StSt Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: StSt
Material No.: 1.4301 / 1.4303
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 V2A R125M
Part No.: 860 908
or equivalent.
Round wires - Stainless steel wire, 10 mm / 78 mm², StSt Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: StSt
Material No.: 1.4301 / 1.4303
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 V2A R20M
Part No.: 860 920
or equivalent.
Round wires - StSt wire, 10 mm / 78 mm², StSt Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: StSt
Material No.: 1.4301 / 1.4303
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 V2A R50M
Part No.: 860 950
or equivalent.
Round wires - Stainless steel wire, 10 mm / 78 mm², StSt Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use as air-termination system or down conductor in lightning protection systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: StSt
Material No.: 1.4301 / 1.4303
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 V2A R80M
Part No.: 860 910
or equivalent.
Round wires - Stainless steel wire, 8 mm / 50 mm², StSt (V4A) Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 8 mm
Cross-section: 50 mm2
Material: StSt (V4A)
Material No.: 1.4571 / 1.4404
ASTM / AISI:: 316Ti / 316L
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 8 V4A R125M
Part No.: 860 008
or equivalent.
Round wires - Stainless steel wire, 10 mm / 78 mm², StSt (V4A) Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: StSt (V4A)
Material No.: 1.4571 / 1.4404
ASTM / AISI:: 316Ti / 316L
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 V4A R80M
Part No.: 860 010
or equivalent.
Round wires - Stainless steel wire, 10 mm / 78 mm², StSt (V4A) Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: StSt (V4A)
Material No.: 1.4571 / 1.4404
ASTM / AISI:: 316Ti / 316L
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 V4A R20M
Part No.: 860 020
or equivalent.
Round wires - StSt wire, 10 mm / 78 mm², StSt (V4A) Round wire according to DIN EN 62561-2 (VDE 0185 Part 202) for use in lightning protection and earth-termination systems.
Diameter Ø conductor: 10 mm
Cross-section: 78 mm2
Material: StSt (V4A)
Material No.: 1.4571 / 1.4404
ASTM / AISI:: 316Ti / 316L
Standard: based on EN 62561-2
delivery and installation.
Brand: DEHN
Type: RD 10 V4A R50M
Part No.: 860 050
or equivalent.
Contact
DEHN SE
P.O. Box 16 40
92306 Neumarkt, Germany
Hans-Dehn-Str. 1
92318 Neumarkt, Germany
Tel.: +49 9181 906-0
Fax: +49 9181 906-1100
E-Mail: [email protected]