The BLITZDUCTOR XT base part is an extremely space-saving and universal four-pole feed-through terminal for the insertion of a protection module without signal disconnection if the protection module is removed. The snap-in mechanism at the supporting foot of the base part allows the protection module to be safely earthed via the DIN rail. Since no components of the protective circuit are situated in the base part, maintenance operation is only required for the protection modules.
| Type |
|---|
| Part No. |
| Operating temperature range (TU) |
| Degree of protection |
| For mounting on |
| Connection (input / output) |
| Signal disconnection |
| Cross-sectional area, solid |
| Cross-sectional area, flexible |
| Tightening torque (terminals) |
| Earthing via |
| Enclosure material |
| Colour |
| ATEX approvals |
| IECEx approvals |
| Approvals |
| Weight |
| GTIN |
| PU |
| Part No. |
| *) only in connection with an approved protection module |
BLITZDUCTOR XT base part BXT BAS Base part as feed-through terminal for BLITZDUCTOR XT/SP/XTU modules No signal interruption when the module is removed Width: 12 mm (2/3 modules)
Cross-sectional area, flexible: 0.08-2.5 mm2
Earthing via: 35 mm DIN rails acc. to EN 60715
delivery and installation.
Brand: DEHN
Type: BXT BAS
Part No.: 920 300
or equivalent.
The BLITZDUCTOR SP base part is an extremely space-saving and universal four-pole terminal for the insertion of a protection module with signal disconnection if the protection module is removed. The snap-in mechanism at the supporting foot of the base part allows the protection module to be safely earthed via the DIN rail. Since no components of the protective circuit are situated in the base part, maintenance operation is only required for the protection modules.
| Type |
|---|
| Part No. |
| Operating temperature range (TU) |
| Degree of protection |
| For mounting on |
| Connection (input / output) |
| Signal disconnection |
| Cross-sectional area, solid |
| Cross-sectional area, flexible |
| Tightening torque (terminals) |
| Earthing via |
| Enclosure material |
| Colour |
| Approvals |
| Weight |
| GTIN |
| PU |
| Part No. |
| *) only in connection with an approved protection module |
BLITZDUCTOR SP base part BSP BAS 4 Base part as feed-through terminal for BLITZDUCTOR XT/SP/XTU modules Signal interruption when the module is removed Width: 12 mm (2/3 modules)
Cross-sectional area, flexible: 0.08-2.5 mm2
Earthing via: 35 mm DIN rails acc. to EN 60715
delivery and installation.
Brand: DEHN
Type: BSP BAS 4
Part No.: 926 304
or equivalent.
For directly earthing cores connected to the BLITZDUCTOR XT / XTU / SP base part.
BXT M4 E earthing module for BLITZDUCTOR SP/XT/XTU base parts Plug-in module for direct earthing of the cores connected to the BLITZDUCTOR XT base part.
delivery and installation.
Brand: DEHN
Type: BXT M4 E
Part No.: 920 308
or equivalent.
Module for testing lines, plugs into BLITZDUCTOR XT / XTU / SP base parts.
BXT M4 T test / disconnection module f. BLITZDUCTOR SP/XT/XTU base parts Plug-in module for insulation testing the lines without disconnecting the connecting wires, can be plugged into BLITZDUCTOR XT base parts.
delivery and installation.
Brand: DEHN
Type: BXT M4 T
Part No.: 920 309
or equivalent.
2x 165 adhesive labels for labelling DRC MCM XT monitoring devices with the bus address.
Labelling system BA1-BA15 Transparent adhesive labels printed with BA1 (1.1-1.10) to BA15 (15.1-15.10) for easy labelling of DRC MCM XT monitoring devices and BLITZDUCTOR XT base parts or modules; transparent, permanently adhesive, abrasion-proof
delivery and installation.
Brand: DEHN
Type: BS BA1 BA15 BXT
Part No.: 920 398
or equivalent.
Two spring terminals for permanent low-impedance shield contact with the protected and unprotected side of a BLITZDUCTOR XT / XTU / SP arrester. With integrated coding for direct or indirect shield earthing. Cable ties and insulating strips are included. Suitable for BXT(U) ML2 ...S ... / BSP M2 ... types (only direct shield earthing).
EMC spring terminals of type SAK BXT LR 2 spring terminals for permanent low-impedant shield contact to the protected and unprotected side of a BLITZDUCTOR XT. With integrated terminal coding for direct or indirect shield earthing, with cable ties and insulating cap.
delivery and installation.
Brand: DEHN
Type: SAK BXT LR
Part No.: 920 395
or equivalent.
Visual remote indicator for (multiple) surge protective devices (SPDs)
DPAN L visual remote indication for surge protective devices Visual remote indicator with current-saving LEDs for surge protective devices (SPDs) With remote signalling contact Also suited for alarm signalling of other devices with floating changeover contact For installation in switchgear cabinet doors. Power supply: 2x 1.5 V AA batteries Degree of protection: IP 40 Mounting dimensions: 92 x 45 mm Dimensions: 96 x 48 x 75 mm
delivery and installation.
Brand: DEHN
Type: DPAN L
Part No.: 910 200
or equivalent.
Contact
DEHN SE
P.O. Box 16 40
92306 Neumarkt, Germany
Hans-Dehn-Str. 1
92318 Neumarkt, Germany
Tel.: +49 9181 906-0
Fax: +49 9181 906-1100
E-Mail: [email protected]
