BLITZDUCTOR XT base part for use as an extremely space-saving and universal four-pole feed-through terminal for intrinsically safe circuits for the insertion of the protection module, no signal disconnection if the protection module is removed. The snap-in mechanism at the supporting foot of the base part allows the device to be safely earthed via the DIN rail. Since no components of the protective circuit are situated in the base part, only the protection modules must be maintained.
| Type |
|---|
| Part No. |
| Operating temperature range |
| Degree of protection |
| For mounting on |
| Connection (input / output) |
| Cross-sectional area, solid |
| Cross-sectional area, flexible |
| Tightening torque (terminals) |
| Earthing via |
| Enclosure material |
| Colour |
| ATEX approvals (1) |
| ATEX approvals (2) |
| IECEx approvals (1) ( ) |
| IECEx approvals (2) |
| CSA & USA Hazloc approvals (1) |
| CSA & USA Hazloc approvals (2) |
| Inmetro approvals |
| Approvals |
| Weight |
| GTIN |
| PU |
| Part No. |
| *) only in connection with an approved protection module |
BLITZDUCTOR XT base part BXT BAS EX Base part in the form of a feed-through terminal (Ex (i) version) for BLITZDUCTOR XT Ex (i) surge arrester modules No signal interruption when the module is removed For four single cores or two pairs Width: 12 mm (2/3 modules)
Cross-sectional area, flexible: 0.08-2.5 mm2
delivery and installation.
Brand: DEHN
Type: BXT BAS EX
Part No.: 920 301
or equivalent.
Contact
DEHN SE
P.O. Box 16 40
92306 Neumarkt, Germany
Hans-Dehn-Str. 1
92318 Neumarkt, Germany
Tel.: +49 9181 906-0
Fax: +49 9181 906-1100
E-Mail: [email protected]
