Accessories for LSA Technology

Highlights

Proven insulation displacement method
45° angled blades in the disconnection block ensure a minimum change in cross-section
Enhanced stability of the conductor
Enhanced corrosion resistance
Further accessories available on request

Description

The insulation displacement method is used for quickly connecting several lines at reasonable costs. This method is commonly used in the telecommunications sector (e.g. Deutsche Telekom AG).
The blocks are suitable for connecting plastic-insulated wires with copper conductor material:
Conductor diameter: 0.4-0.8 mm
Outer diameter: 0.7-1.5 mm

After using wires with a conductor diameter of 0.65 mm, rewiring to smaller diameters is no longer possible.

Models

Mounting Frame

Insertion Tool

Terminal Block

Disconnection Block

Earthing Plug

Routing Module for Disconnection Blocks with LSA spring-loaded Terminal

Mounting Frame

open PDF

Mounting frame for 10 LSA blocks of the 2/10 series, total width: 104.5 mm

Specifications

MB2 10 LSA
907 995
223 x 105 x 42 mm
231 g
4013364033528
1 pc(s)
Specifications (PDF)

Further Pictures

Further Information

Product Specifications (Text)

Back

MB2 10 LSA mounting bracket for 10 LSA blocks 
Mounting frame LSA, type series 2/10,
out of stainless steel, for supporting 10 LSA 
blocks 2/10 for surge protective components 
DEHNrapid LSA and DPL 10 G3...

delivery and installation.

Brand: DEHN

Type: MB2 10 LSA

Part No.: 907 995

or equivalent.

Insertion Tool

Insertion tool with sensor for LSA technology for connecting the wires and simultaneously cutting them to the required length. With fold-out extraction hook and blade.

Specifications

AW2 LSA
907 994
white
105 g
4013364033511
1 pc(s)
Specifications (PDF)

Further Pictures

Further Information

Product Specifications (Text)

Back

AW2 LSA insertion tool for LSA technology
Insertion tool for LSA terminal blocks, series 2/10,
with sensor, for connecting the wires and 
simultaneous cutting of residual lengths, 
with extractor hook and unlatching blade

delivery and installation.

Brand: DEHN

Type: AW2 LSA

Part No.: 907 994

or equivalent.

Terminal Block

Series 2 for LSA technology for inseparably connecting 10 pairs each on the cable and routing side. Accommodates DPL 10 G3 arresters. Parallel protective circuit only.

Specifications

Type
Part No.
Enclosure material
Test standards
Diameter of solid conductors
Conductor diameter with insulation
Contacting frequency for conductor diameters ≤ 0.65 mm
Contacting frequency for conductor diameters of 0.8 mm
Contact material
Contact surface
Flame protection
Insulation resistance
Volume resistance of IPC terminal
Electric strength
Weight
GTIN
PU
Part No.

AL2 10DA LSA
907 997
PBT
DIN 47608-1, -2
0.40-0.80 mm
0.70-1.50 mm
> 50 x
≤ 50 x
special brass
silver
UL 94 V-0
5x 10,000 Mohms
< 10 mohms
2 kV / 50 Hz
51 g
4013364033542
1 pc(s)
907 997
Specifications (PDF)

Further Pictures

Further Information

Product Specifications (Text)

Back

AL2 10DA LSA terminal block for LSA technology 
Terminal block LSA, type series 2/10,
for connecting 10 pairs each - on the cable and 
routing side, conductor diameter 0,4 – 0,8 mm, 
also for plugging of surge protective components
DPL 10 G3...

delivery and installation.

Brand: DEHN

Type: AL2 10DA LSA

Part No.: 907 997

or equivalent.

Certificates

CE_Schell_connect

CE_SPD_Blockmagazine_DPL.pdf

Disconnection Block

Series 2 for LSA technology for connecting 10 pairs each on the cable and routing side. Protection is provided between the disconnection contacts as soon as DRL components are plugged in. DPL 10 G3 arresters can also be plugged into the disconnection block.

Specifications

Type
Part No.
Enclosure material
Test standards
Approvals
Diameter of solid conductors
Conductor diameter with insulation
Contacting frequency for conductor diameters ≤ 0.65 mm
Contacting frequency for conductor diameters of 0.8 mm
Contact material
Contact surface
Flame protection
Insulation resistance
Volume resistance of IPC terminal
Electric strength
Weight
GTIN
PU
Part No.

TL2 10DA LSA
907 996
PBT
DIN 47608-1, -2
compliance with DTAG TS 0272/96
0.40-0.80 mm
0.70-1.50 mm
> 50 x
≤ 50 x
special brass
silver
UL 94 V-0
5x 10.000 Mohms
< 10 mohms
2 kV / 50 Hz
60 g
4013364033535
1 pc(s)
907 996
Specifications (PDF)

Further Pictures

Further Information

Product Specifications (Text)

Back

TL2 10DA LSA disconnection block for LSA technology
Disconnection block LSA, type series 2/10,
for connecting 10 pairs each - on the cable and 
routing side, conductor diameter 0,4 – 0,8 mm, 
also for plugging of surge protective components
DEHNrapid LSA

delivery and installation.

Brand: DEHN

Type: TL2 10DA LSA

Part No.: 907 996

or equivalent.

Certificates

CE_DEHNrapid

CE_SPD_Blockmagazine_DPL.pdf

Earthing Plug

Series 2 for LSA technology for connecting up to 38 earth drain wires or unused signal cores. With earth wire and M4 ring cable lug.

Specifications

Type
Part No.
Earthing via
Diameter of solid conductors
Conductor diameter with insulation
Contacting frequency for conductor diameters ≤ 0.65 mm
Contacting frequency for conductor diameters of 0.8 mm
Contact material
Contact surface
Flame protection
Insulation resistance
Volume resistance of IPC terminal
Electric strength
Colour ( )
Weight
GTIN
PU
Part No.

EL2 38EA LSA
907 993
earthing conductor with M4 ring cable lug
0.40 - 0.80 mm
0.70 - 1.50 mm
> 50 x
≤ 50 x
special brass
silver
UL 94 VO
5x 10,000 Mohms
< 10 mohms
2 kV / 50 Hz
red
60 g
4013364048584
1 pc(s)
907 993
Specifications (PDF)

Further Pictures

Further Information

Product Specifications (Text)

Back

Earthing plug for LSA technology
Earth conductor block LSA, type series 2/10,
for connecting 38 earth wires, 
conductor diameter 0,4 – 0,8 mm

delivery and installation.

Brand: DEHN

Type: EL2 38EA LSA

Part No.: 907 993

or equivalent.

Certificates

46007 1_CE

Routing Module for Disconnection Blocks with LSA spring-loaded Terminal

open PDF

DIN rail mounted routing module with LSA disconnection block of the 2/10 series as well as spring-loaded terminals for variable wire connection. DPL and DEHNrapid LSA surge arresters can be plugged into the routing module.

Specifications

Type
Part No.
Carrying capacity of connection components D1 Total lightning impulse current (10/350 µs) (I_imp)
Operating temperature range (T_U)
Degree of protection
For mounting on
Connection (input / output)
Cross-sectional area of spring terminal, solid
Cross-sectional area of spring terminal, flexible
Earthing via
Enclosure material
Diameter of solid conductors
Conductor diameter with insulation
Volume resistance of IPC terminal
Weight
GTIN
PU
Part No.

TL2 10DA CC
907 991
5 kA
-40 °C ... +80 °C
IP 20
35 mm DIN rails acc. to EN 60715
spring or LSA / spring or LSA
0.08-2.5 mm²
0.08-2.5 mm²
DIN rail / flat connector 6.3 mm
PA / PBT
0.40-0.80 mm
0.70-1.60 mm
< 10 mohms
181 g
4013364112988
1 pc(s)
907 991
Specifications (PDF)

Further Pictures

Further Information

Product Specifications (Text)

Back

DIN rail mounted TL2 10DA CC routing module for disconnection blocks
DIN rail mounted routing module for disconnection blocks equipped
with LSA disconnection block 2/10 as well as spring loaded terminals
for variable wire connection. DPL and DEHNrapid LSA surge arresters
can be plugged into the routing module.

delivery and installation.

Brand: DEHN

Type: TL2 10DA CC

Part No.: 907 991

or equivalent.

Installation Instructions

Certificates

CE_TL2_10DA_CC

CAD-Data for registered Users

907991.stp
907991.igs
907991.jt
907991.dwg
907991m_D.dxf