+ DEHNrecord Alert

Information

  • Communication of the device status via Modbus TCP / RTU
  • Integration of Red/Line® SPDs via remote signalling contacts and Yellow/Line SPDs via serial interfaces
  • Monitoring of up to 4 surge arresters with remote signalling contacts and up to 150 BLITZDUCTOR®XT arresters
  • Integration of the remote signalling contacts of further user-defined functional modules in the monitoring system
  • Further bus protocols can be realized on request

Description

DEHNrecord Alert sends status reports on surge protective devices (SPDs) via Modbus TCP/RTU to an evaluation system. It enables transmission to devices like notebooks, tablets, smartphones and PCs or to the system control room. With an app, the start-up of DEHNrecord Alert is quick and easy. The app relays device information, e.g. part number, type designation and replacement modules, to DEHNrecord Alert. Sending this data to the user’s device facilitates the efficient, cost-effective co-ordination and conduct of service and maintenance work.

Detail

Configuration of the whole DEHNrecord Alert system with Red/Line® and Yellow/Line surge arresters.

Models

DRC AL MODBUS

DRC MCM AL XT

DRC AL MODBUS

DEHNrecord Alert sends status reports on surge protective devices (SPDs) via Modbus TCP/RTU to an evaluation system. It enables transmission to devices like notebooks, tablets, smartphones and PCs or to the system control room. With an app, the start-up of DEHNrecord Alert is quick and easy. The app relays device information, e.g. part number, type designation and replacement modules, to DEHNrecord Alert. Sending this data to the user’s device facilitates the efficient, cost-effective co-ordination and conduct of service and maintenance work.

Specifications

Type
Part No.
Integration of
Operating
Integration
Input voltage range (d.c.) (UIN)
Power max.
Terminating resistor
Connection Modbus RTU
Connection Modbus TCP
Communication type
Operating temperature range (TU)
Degree of protection
Dimensions
For mounting on
Connection supply/digital inputs/RS 485
Connection Ethernet
Cross-sectional area, solid / flexible
Enclosure material
Colour
Test standards
Connection of remote signalling contacts
Input wiring
Input voltage
Input current of remote signalling contacts
Connection DRC MCM AL XT
Dimensions
Weight
GTIN
PU
Part No.
  • DRC AL MODBUS
  • 910 694 +
  • up to 15 DRC MCM AL XT modules (maximum 150 Blitzductor XT/XTU), up to 4 remote signalling contacts
  • via App
  • in Modbus RTU / TCP areas
  • 11-28 V
  • 600 mW
  • 120 Ω
  • RS 485
  • RJ45
  • Master-Slave
  • -40 °C ... +80 °C
  • IP 10
  • 1 module(s), DIN 43880
  • 35 mm DIN rail acc. to EN 60715
  • screw 2.5 mm2
  • RJ45
  • 0.14-1.5 mm2
  • Ultramid B3UGM210
  • grey
  • CU
  • 4 digital inputs (IEC 61131-2)
  • open = 0; 12 V / 24 V = 1
  • 0-28 V
  • < 6 mA
  • RS 485
  • 18 x 90 x 61 mm
  • 67 g
  • 4013364350212
  • 1 pc(s)
  • 910 694
  • Specifications (PDF)
  • More

DRC MCM AL XT

Basic circuit diagram DRC MCM AL XT
DRC MCM AL XT status display software

DIN rail mounted device with integrated LifeCheck sensor for condition monitoring of max. ten LifeCheck-equipped BLITZDUCTOR XT / XTU arresters. Visual operating state indication via three-coloured LED in conjunction with remote signalling contact (break or make contact). An RS 485 interface allows to connect up to 15 DRC MCM XT and the connection to DEHNrecord Alert.

Specifications

Type
Part No.
For testing
For testing
Operating elements
Indicator
Input voltage range (d.c.) (UIN)
Max. rated current consumption (IIN)
RFID transmission frequency
Message: Replacing of SPD recommended
Test cycle
Operating temperature range for monitoring 10 BXT / BXTU arresters
Operating temperature range for monitoring 8 BXT / BXTU arresters
Operating temperature range for addressing the BXT of 10 BXT / BXTU
Degree of protection
For mounting on
Connection
Cross-sectional area, solid / flexible
Tightening torque (terminal)
Enclosure material
Colour
Test standards
Type of remote signalling contact
Technical data of remote signalling contact
Switching capacity (d.c.)
Switching capacity (a.c.)
Delivery includes
Weight
GTIN
PU
Part No.
  • DRC MCM AL XT
  • 910 698
  • up to 10 BLITZDUCTOR XT / XTU ML arresters
  • up to 10 BLITZDUCTOR XT / XTU ML EX arresters; for use in non-hazardous atmospheres only! Observe thread measure!
  • multiway button, DIP switch
  • three-coloured LED (green, orange, red)
  • 18-48 V
  • 100 mA
  • 125 kHz
  • LED, remote signalling contact (break and make contact)
  • continuous
  • -20 °C ... +60 °C
  • -40 °C ... +80 °C
  • 0 °C ... +60 °C
  • IP 20
  • 35 mm DIN rails acc. to EN 60715
  • screw
  • 0.08-2.5 mm2
  • 0.4 Nm
  • polyamide PA 6.6
  • grey
  • EN 61010-1, 61000-6-2/4, ETSI EN 300 330-1 V1.7.1
  • make (no) and break contact (nc)
  • contact resistance < 25 ohms; leakage current < 1 µA
  • 350 V / 0.12 A
  • 250 V / 0.07 A
  • base part, monitoring module, quick guide and labelling system
  • 67 g
  • 4013364337053
  • 1 pc(s)
  • 910 698
  • Specifications (PDF)
  • More
    • Further Pictures
      Basic circuit diagram DRC MCM AL XT
      open PDF
      DRC MCM AL XT status display software
      Further Information
      Product Specifications (Text)

      Back

      DRC MCM XT DIN rail mounted device with LifeCheck sensor 
DIN rail mounted device with integrated LifeCheck 
sensor for condition-based monitoring of max. 10 
BXT devices with LifeCheck. Visual operating 
state indication combined with remote signalling 
contact, break or make contact can be selected. 
BXT devices to be monitored can be pre-programmed by 
means of DRC MCM via a PC and a standard RS 485 
adapter or by means of DRC LC M3.

      delivery and installation.

      Brand: DEHN
      Type: DRC MCM AL XT
      Part No.: 910 698

      or equivalent.
      Installation Instructions
      CAD-Data for registered Users
      910695.stp
      910695.igs
      910695.jt
      910695.dwg
      910695m_D.dxf