Accessories for Condition Monitoring System with LifeCheck® Sensor
Details
DIN Rail mounted Power Supply Unit
High-performance DIN rail mounted power supply unit with single-phase wide-range input can be connected to different supply systems. The operating state indicator on the front panel indicates that the output voltage is present. Up to 10 DRC MCM XT or DRC SCM XT (single application) or up to 15 DRC MCM XT (multiple application) monitoring devices can be connected to a single power supply unit.
Specifications
| Type |
|---|
| Part No. |
| Nominal input voltage (Ue) |
| Input voltage range |
| Input voltage derating |
| Frequency |
| Input current (Ie) |
| Discharge current |
| Switch-on current |
| Mains buffering |
| Nominal output voltage (Ua) |
| Output voltage range |
| Output current (Ia) |
| Presetting |
| Residual ripple |
| Current limitation |
| Behaviour in case of overload |
| Operating state indication |
| Efficiency |
| Power loss (PV) |
| Max. power loss (PV) |
| Integrated fuse |
| Recommended backup fuse |
| Ambient temperature |
| Degree of pollution |
| Climatic category |
| Enclosure |
| Protection class |
| Degree of protection |
| Short-circuit-proof |
| Open-circuit-proof |
| Can be connected in parallel |
| Can be connected in series |
| Cross-sectional area (input / output) |
| Type of attachment |
| Dimensions (W x H x D) |
| Weight |
| Standards / regulations |
| Weight |
| GTIN |
| PU |
| Part No. |
- PSU DC24 30W
- 910 499
- 100-240 V a.c.
- 85-264 V a.c.; 120-373 V d.c.
- < 100 V a.c.: Ia max. 1 A
- 44-66 Hz; 0 Hz
- 0.7 A at 110 V a.c. / 0.5 A at 230 V a.c.
- typ. 1 mA
- < 30 A, NTC
- > 10 ms at 110 V a.c. / > 80 ms at 230 V a.c.
- 24 V d.c. (SELV)
- 22.8-26.4 V d.c., variable
- 1.3 A at 24 V d.c., max. 0.9 A in any installation position
- 24 V d.c.
- < 100 mVpp at 20 MHz
- typ. 1.1 x Ia
- constant current
- green LED
- typ. 82 %
- 2.6 W (230 V a.c. / open circuit), 7.0 W (230 V a.c. / nominal load)
- typ. 7.3 W (100 V a.c. / 24 V, 1.3 A d.c.)
- 2 AT
- circuit breaker 10 A, 16 A, characteristic B, C
- -25 °C ... +55 °C
- 2 (according to EN 50178)
- 3K3 (according to EN 60721)
- plastic, light grey
- prepared for protection class II
- IP20 according to EN 60529
- yes
- yes
- yes
- yes
- 0.08-2.5 mm² / AWG 28 ... 12
- DIN rail mounting (EN 60715)
- 54 x 89 x 59 mm
- 180 g
- EN 60950, EN 61204-3, UL 60950, UL 508, GL
- 180 g
- 4013364157149
- 1 pc(s)
- 910 499
- Specifications (PDF)
- More
- Further Pictures
open PDF 
open PDF - Further Information
- Product Specifications (Text)
DIN rail mounted PSU DC 24 30W power supply unit Primary synchronised power supply in a DIN rail mounted enclosure with single-phase wide-range input for supplying 24 V d.c. systems
Input voltage range : 85-264 V a.c.; 120-373 V d.c.
Output voltage range: 22.8-26.4 V d.c., variable
Output current: 1.3 A at 24 V d.c., max. 0.9 A in any installation position
delivery and installation.
Brand: DEHN
Type: PSU DC24 30W
Part No.: 910 499
or equivalent.
- Certificates
- CE_DRC_MCM_XT_ab 2014
- CE_DRC_SCM_XT
- CAD-Data for registered Users
- 910499m_E.dxf
USB Interface Converter of type USB-NANO-485
USB-Nano-485 converts signals between USB and RS485 and is specifically designed for two-wire RS485 buses. LEDs indicate the operating state (yellow), Rx (green) and Tx (red). Due to its compact dimensions, USB-Nano-485 is ideally suited for use with notebooks, however, stationary use is also possible.
Specifications
| Type |
|---|
| Part No. |
| Speed |
| Cable length |
| Power consumption |
| Operating systems |
| Dimensions (without plug) (H x W x L) |
| Weight |
| GTIN |
| PU |
- USB NANO 485
- 910 486
- up to 3 Mbit/s
- up to 2000 m (for 128 kbit/s)
- 70 mA
- Windows 98, 2000, XP, 7 and Linux from Kernel 2.4.18 and higher
- 12 x 20 x 74 mm
- 130 g
- 4013364124479
- 1 pc(s)
- Specifications (PDF)
- More
- Further Pictures
- Further Information
- Certificates
- CE_DRC_MCM_XT_ab 2014
