TRS MS Dry Cleaning Kit
Nominal Voltages up to 36 kV / 15 ... 60 Hz
- For indoor and outdoor installations
- Equipment for live cleaning by means of suction
- For dry cleaning of transformers and switchgear installations
- Transparent intake tubes ensure enhanced safety
- Specially adapted operating heads for intensive cleaning
- Plug-in coupling system allows fast replacement of operating heads
Details
Requirements
Cleaning work from 1 to 36 kV must be carried out under supervision of a qualified electrician according to EN 50110-1 "Operation of electrical installations – Minimum Requirements", observing clauses 6.3.1 to 6.3.12. In Germany TRS MS dry cleaning kits are subject to DGUV Vorschrift 3 (previously BGV A3) and DGUV Regel 103-011 (previously BGR A3) of the national accident prevention regulations (UVV) "Elektrische Anlagen und Betriebsmittel" [Electrical installations and equipment] stipulated by the German Employer's Liability Association for the Energy, Textiles, Electric and Media Industry (BG ETEM).
Cleaning work from 1 to 36 kV must be carried out under supervision of a qualified electrician according to EN 50110-1 "Operation of electrical installations – Minimum Requirements", observing clauses 6.3.1 to 6.3.12. In Germany TRS MS dry cleaning kits are subject to DGUV Vorschrift 3 (previously BGV A3) and DGUV Regel 103-011 (previously BGR A3) of the national accident prevention regulations (UVV) "Elektrische Anlagen und Betriebsmittel" [Electrical installations and equipment] stipulated by the German Employer's Liability Association for the Energy, Textiles, Electric and Media Industry (BG ETEM).
Figure 1 and Figure 2
Figure 3
1 Intake hose
2 Intake hose adapter
3 Intake tube with
a Lower connecting part
b Handle
c Hand guard
d Insulating element
e Red ring
4 Extension tube
5 Cleaning head
Dimensions:
lH Length of the handle = 540 mm
lI Length of the insulating element = 535 mm
lV Length of the extension
lV min = 115 mm,
lV max = 2515 mm
lG Total length of the intake tube
lG min = 1180 mm,
lG max = 3580 mm
2 Intake hose adapter
3 Intake tube with
a Lower connecting part
b Handle
c Hand guard
d Insulating element
e Red ring
4 Extension tube
5 Cleaning head
Dimensions:
lH Length of the handle = 540 mm
lI Length of the insulating element = 535 mm
lV Length of the extension
lV min = 115 mm,
lV max = 2515 mm
lG Total length of the intake tube
lG min = 1180 mm,
lG max = 3580 mm
