DEHNgate – SPDs for Coaxial Connection

Lightning Current and Surge Arrester

  • Universal surge and combined arresters
  • Maximum discharge capacity for coaxial systems
  • Low voltage protection level allows to protect terminal equipment
  • Contact materials with extremely long endurance

Description

DEHNgate is a family of lightning current / surge arresters designed as a cable adapter for protecting coaxial systems such as cell sites and antenna systems from potential damage. The DEHNgate arrester family comes in different mechanical and electrical designs to suit a wide range of applications, with the various types and arrester technologies providing optimal solutions.
The space-saving DG A FF TV can be mounted onto a DIN rail to protect satellite systems with several outputs. For single applications such as broadband cable connections, the device can be simply snapped into a wall-mounted adapter. Two F connections are also included.
The quarter-wave surge arresters are bandpass filters. Only signals within a defined frequency band are transmitted. Since lightning interferences have a low frequency spectrum, the shorting stub acts as a short-circuit, conducting the lightning current to the ground. This makes the surge arresters mechanically very robust and almost maintenance-free. Due to their low voltage protection level and high discharge capacity, they can be used as combined lightning current and surge arresters. If additional remote supply is needed for the antenna, a combination of a gas discharge tube and quarter-wave technology (DGA LG) should be used. The arresters are made of top-quality materials and give outstanding endurance.

Detail 1

Surge arrester for satellite and broadband cable systems.

Detail 2

F connection for 75-ohm systems.

Detail 3

Coaxial arrester with exchangeable gas capsule.

Detail 4

Maintenance-free quarter-wave surge arresters for protecting high-frequency applications (e.g. LTE).

Models

DGA BNC VC

DGA TV

+
DGA FF5 TV

DGA F

DGA G

DGA AG

DGA LG

DGA L4

DGA BNC VC

Basic circuit diagram DGA BNC VC
Dimension drawing DGA BNC VC

The space-saving surge arrester with BNC socket can be mounted on DIN rails for protecting video and camera systems. Available with direct (VCD) or indirect shield connection (VCID) depending on the type to avoid ground loops.

Specifications

Type
Part No.
SPD class
Nominal voltage (UN)
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
D1 Lightning impulse current (10/350 µs) (Iimp)
C2 Nominal discharge current (8/20 µs) shield-PG (In)
C2 Nominal discharge current (8/20 µs) line-shield (In)
Voltage protection level line-shield for In C2 (Up)
Voltage protection level shield-PG for In C2 (Up)
Voltage protection level line-shield at 1 kV/µs C3 (Up)
Voltage protection level shield-PG at 1 kV/µs C3 (Up)
Frequency range
Insertion loss at 160 MHz
Insertion loss at 300 MHz
Return loss at 130 MHz
Return loss at 300 MHz
Characteristic impedance (Z)
Series resistance per line
Capacitance line-shield (C)
Capacitance shield-PG (C)
Operating temperature range (TU)
Degree of protection
For mounting on
Connection (input / output)
Earthing via
Enclosure material
Colour
Test standards
Approvals
Weight
GTIN
PU
Part No.
  • DGA BNC VCID
  • 909 711
  • T
  • 5 V
  • 6.4 V
  • 0.1 A
  • 1 kA
  • 10 kA
  • 5 kA
  • ≤ 35 V
  • ≤ 650 V
  • ≤ 13 V
  • ≤ 600 V
  • 0-300 MHz
  • ≤ 0.4 dB
  • ≤ 3 dB
  • ≥ 20 dB
  • ≥ 10 dB
  • 50 ohms
  • 4.7 ohms
  • ≤ 25 pF
  • ≤ 20 pF
  • -40 °C ... +80 °C
  • IP 10
  • 35 mm DIN rails according to EN 60715
  • BNC socket / BNC socket
  • 35 mm DIN rail according to EN 60715
  • zinc die-casting
  • bare surface
  • IEC 61643-21 / EN 61643-21
  • CSA, UL
  • 116 g
  • 4013364118980
  • 1 pc(s)
  • 909 711
  • Specifications (PDF)
  • More

DGA TV

Basic circuit diagram DGA GFF TV consisting of DGA GF TV and DGA FF TV
Dimension drawing DGA GFF TV consisting of DGA GF TV and DGA FF TV

DGA ... TV arresters with F connection for remote supply protect 75-ohm satellite and broadband cable systems and fulfil the high shielding requirements of class A according to EN 50083-2. They allow space-saving installation in all common TV and satellite applications and are available as lightning current arresters, surge arresters as well as combined lightning current and surge arresters with integrated measuring output, allowing the system to be easily tested.

Specifications

Type
Part No.
SPD class
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
D1 Lightning impulse current (10/350 µs) (Iimp)
C2 Nominal discharge current (8/20 µs) (In)
Voltage protection level for Iimp D1 (UP)
Voltage protection level for In C2 (UP)
Voltage protection level at 1 kV/µs C3 (UP)
Frequency range
Insertion loss
Insertion loss 5-862 MHz typ.
Insertion loss 862-2400 MHz typ.
Insertion loss 2400-3000 MHz typ.
Return loss
Return loss (5-8 MHz)
Return loss (8-47 MHz)
Return loss (47-2400 MHz)
Return loss test socket (5-47 MHz)
Test socket connection loss
Shield attenuation 5-300 MHz
Shield attenuation 300-470 MHz
Shield attenuation 470-1000 MHz
Shield attenuation 1000-2400 MHz
Characteristic impedance (Z)
Operating temperature range (TU)
Degree of protection (if lines are connected)
For mounting on
Connection (input / output)
Earthing via
Enclosure material
Colour
Test standards
Approvals
Accessories
Weight
GTIN
PU
Part No.
  • DGA FF TV
  • 909 703
  • {
  • 24 V
  • 2 A
  • 0.2 kA
  • 1.5 kA
  • ≤ 230 V
  • ≤ 300 V
  • ≤ 60 V
  • d.c. / 5-3000 MHz
  •  
  • 1.2 dB
  • 1.4 dB
  • 2 dB
  • ≥ 14 dB
  •  
  •  
  • ≥ 18 dB (-1.5 dB/octave)
  • ≥ 18 dB
  • 20 dB
  • ≥ 85 dB
  • ≥ 80 dB
  • ≥ 75 dB
  • ≥ 55 dB
  • 75 ohms
  • -40 °C ... +80 °C
  • IP 30
  • 35 mm DIN rails acc. to EN 60715 or wall mounting
  • F socket / F socket
  • DIN rail or screw connection
  • metal
  • bare surface
  • IEC 61643-21 / EN 61643-21
  • EAC
  • 2x F plugs
  • 233 g
  • 4013364085664
  • 1 pc(s)
  • 909 703
  • Specifications (PDF)
  • More
    • Further Pictures
      Basic circuit diagram DGA FF TV
      open PDF
      Dimension drawing DGA FF TV
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate DGA FF TV surge arrester
DEHNgate surge arrester
SPD class: type 3/P1
With integrated measuring / test output for 
coaxial 75-ohm TV and SAT systems, tested  
to EN 61643-21, energy-coordinated with  DGA GF TV
lightning current arrester, suitable for remote 
supply, wall-mounted adapter and two F-connectors 
included
Class A product
      Max. continuous operating voltage (d.c.): 24 V
      D1 Lightning impulse current (10/350 µs): 0.2 kA
      C2 Nominal discharge current (8/20 µs): 1.5 kA
      Frequency range: d.c. / 5-3000 MHz 

      delivery and installation.

      Brand: DEHN
      Type: DGA FF TV
      Part No.: 909 703

      or equivalent.
      Installation Instructions
      Certificates
      CE_DEHNgate_abDez.2014
      CE_DGA_FF_TV
  • DGA GF TV
  • 909 704
  • H
  • 60 V
  • 2 A
  • 2.5 kA
  • 10 kA
  • ≤ 700 V
  • ≤ 700 V
  • ≤ 600 V
  • 0-2400 MHz
  • 0.5 dB
  •  
  •  
  •  
  • ≥ 18 dB (-1.5 dB/octave)
  •  
  •  
  •  
  •  
  •  
  • ≥ 85 dB
  • ≥ 80 dB
  • ≥ 75 dB
  • ≥ 55 dB
  • 75 ohms
  • -40 °C ... +80 °C
  • IP 30
  • earthing brackets
  • F socket / F plug
  • earthing bracket with screw connection
  • metal
  • bare surface
  • IEC 61643-21 / EN 61643-21
  • EAC
  • earthing bracket and 2x F plug
  • 86 g
  • 4013364105690
  • 1 pc(s)
  • 909 704
  • Specifications (PDF)
  • More
    • Further Pictures
      Basic circuit diagram DGA GF TV
      open PDF
      Dimension drawing DGA GF TV
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate DGA GF TV lightning current arrester
DEHNgate lightning current arrester 
SPD class: type 1
For coaxial 75-ohm TV and SAT systems, tested 
to EN 61643-21, energy-coordinated with 
surge arrester DGA FF TV, suitable for remote 
supply, earthing via earthing block, earthing 
block and two F-connectors included
Class A product
      Max. continuous operating voltage (d.c.): 60 V
      D1 Lightning impulse current (10/350 µs): 2.5 kA
      C2 Nominal discharge current (8/20 µs): 10 kA
      Frequency range: 0-2400 MHz 

      delivery and installation.

      Brand: DEHN
      Type: DGA GF TV
      Part No.: 909 704

      or equivalent.
      Installation Instructions
      Certificates
      CE_DGA_GF_TV
  • DGA GFF TV
  • 909 705
  • H{
  • 24 V
  • 2 A
  • 2.5 kA
  • 10 kA
  • ≤ 230 V
  • ≤ 300 V
  • ≤ 60 V
  • d.c. / 5-2400 MHz
  •  
  • 1.7 dB
  • 1.9 dB
  •  
  •  
  • ≥ 10 dB
  • ≥ 14 dB
  • ≥ 18 dB (-1.5 dB/octave)
  • ≥ 18 dB
  • 20 dB
  • ≥ 85 dB
  • ≥ 80 dB
  • ≥ 75 dB
  • ≥ 55 dB
  • 75 ohms
  • -40 °C ... +80 °C
  • IP 30
  • 35 mm DIN rails acc. to EN 60715 or wall mounting
  • F socket / F socket
  • DIN rail or screw connection
  • metal
  • bare surface
  • IEC 61643-21 / EN 61643-21
  • EAC
  • 2x F plug
  • 283 g
  • 4013364105706
  • 1 pc(s)
  • 909 705
  • Specifications (PDF)
  • More

+ DGA FF5 TV

Basic circuit diagram DGA FF5 TV
Dimension drawing DGA FF5 TV

Five-channel surge arrester for 75 Ohm antenna systems. Special design for SAT antanna splitters and multi-switches. The arrester fulfills the shielding requirements of class A acc. to EN 50083-2. For use at the boundaries of zones 0B – 2. Delivery includes fastening material, EB conductor and F-Connector adapter for mounting the arrester directly on a multi-switch.

Expected to be available in the third quarter of 2018!

Specifications

Type
Part No.
SPD class
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
D1 Lightning impulse current (10/350 µs) (Iimp)
D1 Total lightning impulse current (10/350 µs) (Iimp)
C2 Nominal discharge current (8/20 µs) (In)
C2 Total nominal discharge current (8/20 µs) (In)
Voltage protection level for In C2 (UP)
Voltage protection level at 1 kV/µs C3 (UP)
Frequency range
Insertion loss 5-2200 MHz typ.
Insertion loss 5-2400 MHz typ.
Near-end crosstalk attenuation 5-2400 MHz typ.
Characteristic impedance (Z)
Operating temperature range (TU)
Degree of protection
Mounting
Connection (input / output)
Earthing via
Enclosure material
Colour
Test standards
Accessories
Weight
GTIN
PU
Part No.
  • DGA FF5 TV
  • 909 706 +
  • T
  • 20 V
  • 0.4 A
  • 0.5 kA
  • 2.5 kA
  • 2.5 kA
  • 12.5 kA
  • ≤ 500 V
  • ≤ 120 V
  • 47-2200 MHz
  • ≤ 1 dB
  • ≤ 3 dB
  • ≥ 40 dB
  • 75 Ohm
  • -25 °C ... +55 °C
  • IP 40
  • wall mounting
  • F socket / F socket
  • enclosure
  • metal
  • silver
  • IEC 61643-21 / EN 61643-21
  • fixing screws, dowels, EB conductor
  • 222 g
  • 4013364362437
  • 1 pc(s)
  • 909 706
  • Specifications (PDF)
  • More
    • Further Pictures
      Basic circuit diagram DGA FF5 TV
      open PDF
      Dimension drawing DGA FF5 TV
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      Surge arrester DEHNgate DGA FF5 TV
SPD class Type 2 / P1
Five-channel DEHNgate for
coaxial 75 Ohm TV and SAT
systems, tested acc. to EN 61643-21
Mounting accessories included
Connection for equipotential bonding on enclosure outside
Class A product
      Max. continuous operating voltage (d.c.): 20 V
      D1 Lightning impulse current (10/350 µs): 0.5 kA
      D1 Total lightning impulse current (10/350 µs): 2.5 kA
      C2 Nominal discharge current (8/20 µs): 2.5 kA
      C2 Total nominal discharge current (8/20 µs): 12.5 kA
      Frequency range: 47-2200 MHz 

      delivery and installation.

      Brand: DEHN
      Type: DGA FF5 TV
      Part No.: 909 706

      or equivalent.
      Installation Instructions
      CAD-Data for registered Users
      909706.stp
      909706.igs
      909706.jt
      909706.dwg
      909706.dxf

DGA F

Basic circuit diagram DGA F
Dimension drawing DGA F

Quickly operating surge arrester for G.703 interfaces with low-capacitance diode matrix for optimised transmission performance. Earthing via enclosure. 1.6/5.6 connection.

Specifications

Type
Part No.
SPD class
Nominal voltage (UN)
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
C2 Nominal discharge current (8/20 µs) (In)
Voltage protection level for In C2 (UP)
Voltage protection level at 1 kV/µs C3 (UP)
Frequency range
Insertion loss
Characteristic impedance (Z)
Capacitance line-shield (C)
Operating temperature range (TU)
Degree of protection
Connection
Earthing via
Enclosure material
Colour
Test standards
Approvals
Weight
GTIN
PU
Part No.
  • DGA F 1.6 5.6
  • 929 040 ,
  • W
  • 5 V
  • 6 V
  • 0.25 A
  • 0.3 kA
  • ≤ 30 V
  • ≤ 12 V
  • 0-80 MHz
  • ≤ 0.2 dB
  • 75 ohms
  • 50 pF
  • -40 °C ... +80 °C
  • IP 20
  • 1.6/5.6 plug / 1.6/5.6 socket
  • externally via shield earthing
  • metal
  • bare surface
  • IEC 61643-21 / EN 61643-21
  • EAC
  • 21 g
  • 4013364080294
  • 1 pc(s)
  • 929 040
  • Specifications (PDF)
  • More

DGA G

Basic circuit diagram DGA G
Dimension drawing DGA G

Surge arrester for remote supply with integrated gas discharge tube. Ideally suited for wireless applications for the coaxial interfaces of devices and antennas.
Available with SMA, BNC or N connection for bushing installation.

Specifications

Type
Part No.
SPD class
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
Max. transmission capacity
D1 Lightning impulse current (10/350 µs) (Iimp)
C2 Nominal discharge current (8/20 µs) (In)
Voltage protection level for In C2 (UP)
Frequency range
Insertion loss
Return loss (d.c. - 3 GHz)
Return loss (d.c. - 5.6 GHz)
Return loss (3 GHz-4 GHz)
Return loss (3 GHz-5.8 GHz)
Return loss (5.6 GHz-5.8 GHz)
Characteristic impedance (Z)
Operating temperature range (TU)
Degree of protection (if lines are connected)
Connection
Earthing via
Enclosure material
Colour
Test standards
Weight
GTIN
PU
Part No.
  • DGA G SMA
  • 929 039
  • B
  • 135 V
  • 2 A
  • 60 W
  • 1 kA
  • 5 kA
  • ≤ 700 V
  • 0-5.8 GHz
  • ≤ 0.2 dB
  • ≥ 20 dB
  •  
  •  
  • ≥ 18 dB
  •  
  • 50 ohms
  • -40 °C ... +85 °C
  • IP 65
  • SMA socket / SMA plug
  • bushing (Ø11.2 mm)
  • gold-plated brass
  • gold
  • IEC 61643-21 / EN 61643-21
  • 24 g
  • 4013364135185
  • 1 pc(s)
  • 929 039
  • Specifications (PDF)
  • More
  • DGA G BNC
  • 929 042
  • B
  • 135 V
  • 3.5 A
  • 25 W
  • 1 kA
  • 5 kA
  • ≤ 650 V
  • 0-4 GHz
  • ≤ 0.2 dB
  • ≥ 20 dB
  •  
  • ≥ 20 dB
  •  
  •  
  • 50 ohms
  • -40 °C ... +85 °C
  • IP 20
  • BNC socket / BNC plug
  • bushing (Ø12.9 mm)
  • brass, gold-plated
  • gold
  • IEC 61643-21 / EN 61643-21
  • 39 g
  • 4013364091030
  • 1 pc(s)
  • 929 042
  • Specifications (PDF)
  • More
  • DGA G N
  • 929 044
  • B
  • 135 V
  • 6 A
  • 60 W
  • 1 kA
  • 5 kA
  • ≤ 650 V
  • 0-5.8 GHz
  • ≤ 0.2 dB
  •  
  • ≥ 20 dB
  •  
  •  
  • ≥ 18.5 dB
  • 50 ohms
  • -40 °C ... +85 °C
  • IP 65
  • N socket / N plug
  • bushing (Ø16.2 mm)
  • brass, gold-plated
  • gold
  • IEC 61643-21 / EN 61643-21
  • 86 g
  • 4013364091054
  • 1 pc(s)
  • 929 044
  • Specifications (PDF)
  • More

DGA AG

Basic circuit diagram DGA AG
Dimension drawings DGA AG

Arrester suitable for remote supply with exchangeable gas discharge tube. Long endurance due to minimum contact erosion resulting from the large-area contact surface of the gas discharge tube.

Specifications

Type
Part No.
SPD class
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
Max. transmission capacity
D1 Lightning impulse current (10/350 µs) (Iimp)
C2 Nominal discharge current (8/20 µs) (In)
Voltage protection level for In C2 (UP)
Frequency range
Insertion loss
Return loss
Characteristic impedance (Z)
Operating temperature range (TU)
Degree of protection
Connection
Earthing via
Enclosure material
Colour
Exchangeable gas discharge tube
Test standards
Weight
GTIN
PU
Part No.
  • DGA AG BNC
  • 929 043
  • A
  • 180 V
  • 3.5 A
  • 150 W
  • 5 kA
  • 20 kA
  • ≤ 850 V
  • 0-1 GHz
  • < 0.1 dB
  • ≥ 19
  • 50 ohms
  • -40 °C ... +85 °C
  • IP 20
  • BNC socket / BNC plug
  • bushing (Ø16.1 mm)
  • brass, refined surface with trimetal plating
  • bare surface
  • yes
  • IEC 61643-21 / EN 61643-21
  • 90 g
  • 4013364091047
  • 1 pc(s)
  • 929 043
  • Specifications (PDF)
  • More
    • Further Pictures
      Basic circuit diagram DGA AG BNC
      open PDF
      Dimension drawings DGA AG BNC
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate DGA AG BNC lightning current arrester
DEHNgate lightning current arrester 
SPD class: type 1
For coaxial 50-ohm antenna systems,
tested to EN 61643-21, suitable for remote 
supply, earthing via bushing, guiding gasket for 
exchangeable gas discharge tube 
      Max. continuous operating voltage (d.c.): 180 V
      D1 Lightning impulse current (10/350 µs): 5 kA
      C2 Nominal discharge current (8/20 µs): 20 kA
      Frequency range: 0-1 GHz 

      delivery and installation.

      Brand: DEHN
      Type: DGA AG BNC
      Part No.: 929 043

      or equivalent.
      Installation Instructions
      Certificates
      CE_DGA_AG_BNC
      CAD-Data for registered Users
      929043m_D.dxf
  • DGA AG N
  • 929 045
  • A
  • 180 V
  • 6 A
  • 150 W
  • 5 kA
  • 20 kA
  • ≤ 850 V
  • 0-2.5 GHz
  • < 0.2 dB
  • ≥ 20
  • 50 ohms
  • -40 °C ... +85 °C
  • IP 65
  • N socket / N plug
  • bushing (Ø16.1 mm) or earthing screw
  • brass, refined surface with trimetal plating
  • bare surface
  • yes
  • IEC 61643-21 / EN 61643-21
  • 266 g
  • 4013364091061
  • 1 pc(s)
  • 929 045
  • Specifications (PDF)
  • More

DGA LG

Basic circuit diagram DGA LG 7 16 MFA
Dimension drawing DGA LG 7 16 MFA

Quarter-wave arrester with spark gap for remote supply protects multi-frequency applications (multi-carrier systems) due to minimum passive intermodulation. Broadband device for all 4+3G and LTE services.

Specifications

Type
Part No.
SPD class
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
Max. transmission capacity
D1 Lightning impulse current (10/350 µs) (Iimp)
C2 Nominal discharge current (8/20 µs) (In)
Voltage protection level for In C2 (UP)
Frequency range
Insertion loss
Return loss
Characteristic impedance (Z)
Intermodulation
Operating temperature range (TU)
Degree of protection
Connection
Earthing via
Enclosure material
Colour
Exchangeable gas discharge tube
Test standards
Weight
GTIN
PU
Part No.
  • DGA LG 7 16 MFA
  • 929 146
  • A
  • 65 V
  • 13 A
  • 1500 W
  • 5 kA
  • 20 kA
  • ≤ 800 V
  • 690 MHz-2.7 GHz
  • ≤ 0.1 dB
  • ≥ 28
  • 50 ohms
  • typ. -160 dBc @ 2*43 dBm
  • -40 °C ... +85 °C
  • IP 67
  • 7/16 socket / 7/16 plug
  • bushing (Ø29.5 mm) or M8 earthing screw
  • brass, refined surface with trimetal plating
  • bare surface
  • yes
  • IEC 61643-21 / EN 61643-21
  • 471 g
  • 4013364157156
  • 1 pc(s)
  • 929 146
  • Specifications (PDF)
  • More

DGA L4

Basic circuit diagram DGA L4
Dimension drawing DGA L4 7 16 S / DGA L4 7 16 MFA

Combined lightning current and surge arrester with maintenance-free quarter-wave technology for multi-frequency applications (multi-carrier systems). The arrester is also capable of discharging high partial lightning currents. No remote supply as the arrester represents an electrical short-circuit for low-frequency signals. Broadband device for all 4+3G services.

Specifications

Type
Part No.
SPD class
Max. continuous operating voltage (d.c.) (UC)
Nominal current (IL)
Max. transmission capacity
D1 Lightning impulse current (10/350 µs) (Iimp)
C2 Nominal discharge current (8/20 µs) (In)
Voltage protection level for In C2 (UP)
Frequency range
Insertion loss
Return loss
Characteristic impedance (Z)
Intermodulation
Operating temperature range (TU)
Degree of protection
Connection
Earthing via
Enclosure material
Colour
Test standards
Weight
GTIN
PU
Part No.
  • DGA L4 7 16 S
  • 929 047
  • M
  • 0 V
  • 0 A
  • 3000 W
  • 25 kA
  • 50 kA
  • ≤ 130 V
  • 380-512 MHz
  • < 0.1 dB
  • ≥ 20
  • 50 ohms
  •  
  • -40 °C ... +85 °C
  • IP 65
  • 7/16 socket / 7/16 plug
  • earthing screw
  • brass, refined surface with trimetal plating
  • bare surface
  • IEC 61643-21 / EN 61643-21
  • 467 g
  • 4013364091085
  • 1 pc(s)
  • 929 047
  • Specifications (PDF)
  • More
    • Further Pictures
      Basic circuit diagram DGA L4 7 16 S
      open PDF
      Dimension drawing DGA L4 7 16 S
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate DGA L4 7 16 S combined arrester
Combined lightning current and surge arrester 
DEHNgate, SPD class TYPE 1/P1, for coaxial 
50 Ohm antenna systems, tested acc. 
to EN 61643-21, constructed in maintenance-free 
quarterwave technology with very low intermo-
dulation loss, high endurably by CuBe-socket and
nickel free 3-metallization, earthing by earthing 
screw

      Max. continuous operating voltage (d.c.): 0 V
      D1 Lightning impulse current (10/350 µs): 25 kA
      C2 Nominal discharge current (8/20 µs): 50 kA
      Frequency range: 380-512 MHz 

      delivery and installation.

      Brand: DEHN
      Type: DGA L4 7 16 S
      Part No.: 929 047

      or equivalent.
      Installation Instructions
      Certificates
      CE_DGA_L4_7_16_S
      CAD-Data for registered Users
      929047.stp
      929047.igs
      929047.jt
      929047.dwg
      929047m_D.dxf
  • DGA L4 7 16 MFA
  • 929 148
  • M
  • 0 V
  • 0 A
  • 1500 W
  • 40 kA
  • 80 kA
  • ≤ 300 V
  • 690 MHz-2.7 GHz
  • ≤ 0.1 dB
  • ≥ 28
  • 50 ohms
  • typ. -160 dBc @ 2*43 dBm
  • -40 °C ... +85 °C
  • IP 67
  • 7/16 socket / 7/16 plug
  • bushing (Ø 29.5 mm) or M8 earthing screw
  • brass, refined surface with trimetal plating
  • bare surface
  • IEC 61643-21 / EN 61643-21
  • 448 g
  • 4013364157163
  • 1 pc(s)
  • 929 148
  • Specifications (PDF)
  • More
    • Further Pictures
      Basic circuit diagram DGA L4 7 16 MFA
      open PDF
      Dimension drawing DGA L4 7 16 MFA
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate DGA L4 7 16 MFA combined arrester
DEHNgate combined arrester
SPD class: type 1/P1 
For coaxial 50-ohm antenna systems, tested 
to EN 61643-21, maintenance-free quarterwave
technology specifically for multi-carrier applications, 
with minimal passive intermodulation,
particularly broadband for all 3+4G and LTE services,
earthing via bushing or earthing screw
      Max. continuous operating voltage (d.c.): 0 V
      D1 Lightning impulse current (10/350 µs): 40 kA
      C2 Nominal discharge current (8/20 µs): 80 kA
      Frequency range: 690 MHz-2.7 GHz 

      delivery and installation.

      Brand: DEHN
      Type: DGA L4 7 16 MFA
      Part No.: 929 148

      or equivalent.
      Installation Instructions
      Certificates
      CE_DGA_L4_7_16_MFA
      CAD-Data for registered Users
      929148.stp
      929148.igs
      929148.jt
      929148.dwg
      929148m_D.dxf

Accessories

Mounting Kit DEHNpatch and DEHNgate

DIN rail mounting kit for DEHNpatch and DEHNgate. For individual installation of the arresters .

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Material (earthing clip)
Material (flat receptable)
Connection cross-section
Weight
GTIN
PU

Gas Discharge Tube for DEHNgate

Lightning current carrying replacement gas discharge tube for DEHNgate arresters. High quality with extremely low capacitance.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Lightning impulse current carrying capability (10/350 µs)
Design
Integrated into Part No.
Weight
GTIN
PU
  • GDT DGA 90
  • 929 497
  • 5 kA
  • H 8 x 6 mm
  • 929 046, 929 146
  • 2 g
  • 4013364104143
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate GDT DGA 90 gas discharge tube
Gas discharge tube for DEHNgate, design H, 
8 x 6 mm, extremely low capacitance
Sparkover voltage: 90 V d.c.


      delivery and installation.

      Brand: DEHN
      Type: GDT DGA 90
      Part No.: 929 497

      or equivalent.
  • GDT DGA 230
  • 929 498
  • 5 kA
  • H 8 x 6 mm
  • 929 043, 929 045
  • 2 g
  • 4013364104136
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate GDT DGA 230 gas discharge tube
Gas discharge tube for DEHNgate, design H,
8 x 6 mm, extremely low capacitance
Sparkover voltage: 230 V d.c.


      delivery and installation.

      Brand: DEHN
      Type: GDT DGA 230
      Part No.: 929 498

      or equivalent.
  • GDT DGA 470
  • 929 499
  • 5 kA
  • H 8 x 6 mm
  •  
  • 2 g
  • 4013364104129
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      DEHNgate GDT DGA 470 gas discharge tube
Gas discharge tube for DEHNgate, design H,
8 x 6 mm, extremely low capacitance
Sparkover voltage: 470 V d.c.


      delivery and installation.

      Brand: DEHN
      Type: GDT DGA 470
      Part No.: 929 499

      or equivalent.

Cable Lug with Earthing Conductor

Cable lug with highly flexible black copper earthing conductor for earthing DEHNgate arresters (Part Nos. 929 043, 929 044 or 929 045).

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Length
Weight
GTIN
PU
  • EL 16 B17
  • 929 096
  • black ●
  • 1000 mm
  • 203 g
  • 4013364107212
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      Cable lug with earthing conductor for earthing DEHNgate EL 16 B17
Cable lug with a hole diameter of 17 mm2 and a  
highly flexible black copper earthing conductor (1 m long) 
for earthing DEHNgate


      delivery and installation.

      Brand: DEHN
      Type: EL 16 B17
      Part No.: 929 096

      or equivalent.

Earthing Block 4xF

Four-pole earthing block with F sockets for equipotential bonding of satellite cable shields or DGA GF TV lightning current arresters.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Max. continuous operating d.c. voltage
D1 Lightning impulse current (10/350 µs)
Frequency range
Weight
GTIN
PU
  • EB 4 F
  • 929 095
  • 65 V
  • 10 kA
  • 0-2400 MHz
  • 90 g
  • 4013364113398
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      EB 4 F earthing block 4xF 
Four-pole earthing block with F sockets at the input and output, 
for equipotential bonding of up to 4 satellite cable shields or 
DGA GF TV lightning current arresters.
Shielding: class A, 75 ohms

      delivery and installation.

      Brand: DEHN
      Type: EB 4 F
      Part No.: 929 095

      or equivalent.

Angled Fixing Plate for DEHNgate

Suitable for installing a DEHNgate arrester (Part Nos. 929 045, 929 146, 929 047, 929 148).

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Material
Weight
GTIN
PU

Angled Fixing Plate for DEHNgate

Suitable for installing a DEHNgate arrester (Part Nos. 929 043 - 929 045), anti-rotation borehole (Ø16 mm).

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Material
Weight
GTIN
PU
  • BW90 B16 B5.1 6.5 11 V2A
  • 106 314
  • StSt
  • 100 g
  • 4013364136304
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      Angled fixing plate for mounting DEHNgate
90° angled fixing plate made of stainless steel, for the installation of DEHNgate, Part No. 929 043 - 929 045. Anti-rotation borehole (Ø16 mm).

      delivery and installation.

      Brand: DEHN
      Type: BW90 B16 B5.1 6.5 11 V2A
      Part No.: 106 314

      or equivalent.

Angled Fixing Plate for HF Arresters

With three boreholes for three different sizes of DEHNgate, e.g. 1x 929 042 + 1x 929 057 + 1x (929 043, 929 044, 929 045 or 929 059).

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Material
Weight
GTIN
PU
  • BW90 B17 21 16 V2A
  • 106 329
  • StSt
  • 143 g
  • 4013364107182
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      Angled fixing plate for DEHNgate
Angled fixing plate made of stainless steel, 90° angled,  with three boreholes for three different sizes of
DEHNgate, e.g. 1x 929 042 + 1x (929 043, 929 044, 929 045 or 929 058).

      delivery and installation.

      Brand: DEHN
      Type: BW90 B17 21 16 V2A
      Part No.: 106 329

      or equivalent.

Equipotential Bonding Busbar for industrial Use

Suitable for 3x DEHNgate (Part Nos. 929 045, 929 047, 929 146, 929 148).

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Material
Weight
GTIN
PU

Earthing Conductor, open / closed Cable Lugs

Cable lug 1x open (M8/M10) and 1x closed (M8), can be combined with Part Nos. 106 310, 106 314, 106 329 and 472 209.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Length
Weight
GTIN
PU
  • EL16 L1.05M 1KSO 8.10 1KSG 8
  • 416 411
  • black ●
  • 1050 mm
  • 266 g
  • 4013364032545
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      Earthing conductor, open and closed cable lug, 1.05 m long
Earthing conductor with open / closed cable lugs 
made of highly flexible copper cable, frost-proof
Cable lug, 1x open M8/M10 and 1x closed M8

      delivery and installation.

      Brand: DEHN
      Type: EL16 L1.05M 1KSO 8.10 1KSG 8
      Part No.: 416 411

      or equivalent.