Earthing and Short-Circuiting Devices (partly insulated) for Low-Voltage Cable Distribution Cabinets

Kit for low-voltage Installations, partly insulated Type TI

Attaching a partly insulated earthing and short-circuiting device using an earthing handle of type TI
  • Fully equipped kit for cable distribution cabinets
  • Safe operation with insulated earthing handle of type TI (with dual function), suitable both for installing and removing earthing cartridges with M10 connection as well as for attaching earthing and short-circuiting devices (EaS devices)
  • Waterproof, plastic-sheathed cable entries and node unit, with additional anti-kink protection
  • Other cable lengths can be selected online via the earthing and short-circuiting configurator

Figure 1

Earthing cartridge with M10 connection, partly insulated connector and earthing handle.

Models

Kit I in Sheet Steel Case

Kit II in Sheet Steel Case

Kit I in Sheet Steel Case

Specifications

Type
Part No.
Variant No. of EaS device
Dimensions
Standard
Temperature range
Weight
GTIN
PU
Attention: Please state the relevant Variant No. when ordering.
  • EKS TI KVS SBK
  • 766 302
  • VSUN6NV
  • 380 x 260 x 80 mm
  • EN/IEC 61230 (DIN VDE 0683-100)
  • –25 °C ... +55 °C
  • 4,38 kg
  • 4013364051317
  • 1 pc(s)
  • Specifications (PDF)
  • More

Kit II in Sheet Steel Case

Specifications

Type
Part No.
Variant No. of EaS device
Dimensions
Standard
Temperature range
Weight
GTIN
PU
Attention: Please state the relevant Variant No. when ordering.

Accessories

Sheet Steel Case, empty

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Dimensions
Weight
GTIN
PU

Sheet Steel Case, empty

With foam padding.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Dimensions
Weight
GTIN
PU

Plastic Case, empty

With foam padding and hook-and-loop fastener.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Dimensions
Weight
GTIN
PU

Earthing and Short-Circuiting Device TI, Earth Clamp with flexible adjustable Handle

Adjustable handle with two positions, clamping range up to 20 mm.
For cable distribution cabinets.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Version
Cable cross-section (phase side)
Cable cross-section (earth side)
Cable cross-section Cu
Length of phase cable A
Length of phase cable B
Length of phase cable C
Length of earthing cable
Fully insulated
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Connection at the phase conductor
Material (bolts)
Temperature range
Weight
GTIN
PU
Part No.
Note: When ordering, please specify a clear Variant No.
  • EKV3 25TI DG VSUN6NV
  • VSUN6NV
  • Three-pole
  • 25 mm2
  • 25 mm2
  • 25/25 mm2
  • 200 mm
  • 400 mm
  • 600 mm
  • 500 mm
  • No
  • 7.0 kA
  • 4.9 kA
  • M10 bolts
  • Copper alloy / gal Sn
  • –25 °C ... +55 °C
  • 1,56 kg
  • 4013364163782
  • 1 pc(s)
  • VSUN6NV
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
  • EKV3 35TI DG VSHDQZB
  • VSHDQZB
  • Three-pole
  • 35 mm2
  • 35 mm2
  • 35/35 mm2
  • 200 mm
  • 400 mm
  • 600 mm
  • 500 mm
  • No
  • 10.0 kA
  • 6.9 kA
  • M10 bolt
  • Copper alloy / gal Sn
  • –25 °C ... +55 °C
  • 1,71 kg
  • 4013364163836
  • 1 pc(s)
  • VSHDQZB
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information

Earthing and Short-Circuiting Device TI, with hook-shaped Cable Lug on the Earth Cable End

For installation of earth clamps EK I FL20 DGF or EK FL20 FS.
For cable distribution cabinets.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Version
Cable cross-section (phase side)
Cable cross-section (earth side)
Cable cross-section Cu
Length of phase cable A
Length of phase cable B
Length of phase cable C
Length of earthing cable
Fully insulated
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Weight
GTIN
PU
Part No.
Note: When ordering, please specify a clear Variant No.
  • EKV3 16TI HK V3RQASE
  • V3RQASE
  • Three-pole
  • 16 mm2
  • 16 mm2
  • 16/16 mm2
  • 200 mm
  • 400 mm
  • 600 mm
  • 500 mm
  • No
  • 4.5 kA
  • 3.2 kA
  • 1,09 kg
  • 4013364163744
  • 1 pc(s)
  • V3RQASE
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
  • EKV3 25TI HK VUKMT58
  • VUKMT58
  • Three-pole
  • 25 mm2
  • 25 mm2
  • 25/25 mm2
  • 200 mm
  • 400 mm
  • 600 mm
  • 500 mm
  • No
  • 7.0 kA
  • 4.9 kA
  • 1,25 kg
  • 4013364163799
  • 1 pc(s)
  • VUKMT58
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
  • EKV3 35TI HK VDZ2VDX
  • VDZ2VDX
  • Three-pole
  • 35 mm2
  • 35 mm2
  • 35/35 mm2
  • 200 mm
  • 400 mm
  • 600 mm
  • 500 mm
  • No
  • 10.0 kA
  • 6.9 kA
  • 1,38 kg
  • 4013364163843
  • 1 pc(s)
  • VDZ2VDX
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information

Earthing and Short-Circuiting Device TI, spring-loaded Earth Clamp

Clamping range up to 24 mm and fixing via adjustable handle DGF EKV VI.
Earthing cartridges of size 00 fixed on the phase cable end.
For service entrance boxes.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Version
Cable cross-section (phase side)
Cable cross-section (earth side)
Cable cross-section Cu
Length of phase cable A
Length of phase cable B
Length of phase cable C
Length of earthing cable
Fully insulated
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Material (clamping part)
Material (sheaths)
Temperature range
Weight
GTIN
PU
Part No.
Note: When ordering, please specify a clear Variant No.
  • EKV3 NH00 TI V1RC3P2
  • V1RC3P2
  • Three-pole
  • 16 mm2
  • 16 mm2
  • 16/16 mm2
  • 140 mm
  • 140 mm
  • 140 mm
  • 250 mm
  • No
  • 4.5 kA
  • 3.2 kA
  • Copper alloy / gal Sn
  • Macrolon
  • –25 °C ... +55 °C
  • 587 g
  • 4013364163737
  • 1 pc(s)
  • V1RC3P2
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information

Earthing and Short-Circuiting Device TI, spring-loaded Earth Clamp

Clamping range up to 24 mm and fixing via adjustable handle DGF EKV VI.
Screw-on cable lugs with M10 hexagon pin on the phase cable end.
To be screwed onto earthing cartridges with M10 connection of service entrance boxes.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Version
Cable cross-section (phase side)
Cable cross-section (earth side)
Cable cross-section Cu
Length of phase cable A
Length of phase cable B
Length of phase cable C
Length of earthing cable
Fully insulated
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Connection on the phase conductor
Material (bolts)
Temperature range
Weight
GTIN
PU
Part No.
Note: When ordering, please specify a clear Variant No.
  • EKV3 16TI EK VSB29AH
  • VSB29AH
  • Three-pole
  • 16 mm2
  • 16 mm2
  • 16/16 mm2
  • 190 mm
  • 140 mm
  • 140 mm
  • 280 mm
  • No
  • 4.5 kA
  • 3.2 kA
  • M10 bolts
  • Copper alloy / gal Sn
  • –25 °C ... +55 °C
  • 805 g
  • 4013364162662
  • 1 pc(s)
  • VSB29AH
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information

NH 00 Earthing Cartridges

With M10 connection for insertion into NH fuse holders and blocks of size NH 00 using a TI earthing handle.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Max. cable cross-section Cu
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Plastic parts
Metal parts
Thread
Weight
GTIN
PU

NH 1 ... 3 Earthing Cartridges

With M10 connection for insertion into NH fuse holders and blocks of size NH 1 ... 3 using a TI earthing handle.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Max. cable cross-section Cu
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Plastic parts
Metal parts
Thread
Weight
GTIN
PU

NH 4a Earthing Cartridges

With M10 connection for insertion into NH fuse holders and blocks of size NH 4a.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Max. cable cross-section Cu
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Plastic parts
Metal parts
Thread
Weight
GTIN
PU

NH 1 ... 3 Earthing Cartridges with grip Lugs

With M10 connection for use with TI earthing handle or NH fuse handle with sleeve NHS AG 00 3 NS.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Max. cable cross-section Cu
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Plastic parts
Metal parts
Thread
Weight
GTIN
PU

Adapter

Adapter for earthing cartridges NH 1…3, partly insulated, with M10 connection.
For screwing in by means of earthing handle TI through opening (Dmin = 11 mm) in the window of NH fuse switch disconnectors.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Material
Thread size
Diameter (bolt)
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Weight
GTIN
PU

Contact Blade

With M10 connection for insertion by means of earthing handle type TI.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Max. cable cross-section Cu
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Material
Connection thread
Weight
GTIN
PU

Touch Protection for Earthing Cartridges NH 1…3

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Material
Weight
GTIN
PU

Screw-in Earthing Insert with M10 connection, insulated

Insulated thread.
To be screwed into E27 and E33 threaded fuse holders using a TI earthing handle.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Conctact pin
Thread
Max. short-circuit current Ik 0.05 s
Weight
GTIN
PU

Screw-in Earthing Insert with M10 connection

Conductive thread.
To be screwed into E27 and E33 threaded fuse holders using a TI earthing handle.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Size
Contact pin
Thread
Max. short-circuit current Ik 0.05 s
Weight
GTIN
PU

Earth Clamp with flexible adjustable Handle and two setting Positions

To be connected to the earth cable end of earthing and short-circuiting devices for cable distribution cabinets, with M8 pin, anti-rotation element and nut.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Clamping range
Weight
GTIN
PU

Bare Earth Clamp with Wing Bolt

To be connected to the earth cable end of earthing and short-circuiting devices for cable distribution cabinets, with M8 pin, anti-rotation element and nut.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Clamping range
Weight
GTIN
PU

Spring-loaded Compact Clamp

With threaded bolt M8 x 12 mm and hexagon locking screw (wrench size 10).
Fixed by means of adjustable handle with flexible shaft.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Clamping range
Max. short-circuit current Ik 0.5 s
Max. short-circuit current Ik 1 s
Weight
GTIN
PU

TI Earthing Handle

With dual function.
For installing earthing cartridges or screw-in earthing inserts with M10 connection
For connecting TI earthing and short-circuiting devices to earthing cartridges (wrench size 19)

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Length
Diameter
Material (insulating tube)
Weight
GTIN
PU

Adjustable Handle with flexible Shaft

With magnetic socket wrench insert.
For connecting spring-loaded earth clamps.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Length
Shaft
Material (handle)
Weight
GTIN
PU